S6405

Heyco HEYClip SunRunner Cable Clip

New model with double-compression design available for thicker module frames.

Heyco HEYClip SunRunner Cable Clips are designed to provide a better method for PV module wire management and may be used wherever single or multiple cable management is needed. They accommodate from (1) 12 gauge USE-2 to (2) 10 gauge PV-1000 solar wires, as well as other cables from .20˝ (5, 0 mm) to .30˝ (7,6 mm) in diameter. Locking tabs securely fasten Heyco's SunRunner Cable Clip to module extrusions or other panels. HEYClip SunRunner 90º Cable Clips are designed to mount at a 90º angle to the original HEYClip SunRunner. The SunRunner 90° will accommodate a single cable from .20˝ (5,0 mm) to .30˝ (7,6 mm). HEYClip SunRunner 90° is designed for use with PV modules mounted in the “landscape” mode. PV modules with shorter than normal junction box cables cannot be dressed out to the sides of the module. The HEYClip SunRunner 90° will allow the junction box cables to be run to the adjacent modules across the short side of the PV module frame.

HEYClip™ SunRunner® Cable Clips for 1-2 Cables

Heyco HEYClip™ SunRunner^® Cable Clips for 1-2 Cables are robust double-compression cable clips that securely hold up to two cables with diameters from 5.1mm to 7.6mm. HEYClip SunRunner Cable Clips for 1-2 Cables are designed to provide a better way to manage photovoltaic (PV) module wires. These Heyco clips can be used wherever single- or multi-cable management is needed. The SunRunner Vidrio™ clips are designed to mount directly onto a glass panel using only compression force. The SunRunner EZ is designed for thicker module frames up to 6.4mm thick